Showing posts with label environmental lab. Show all posts
Showing posts with label environmental lab. Show all posts

Thursday, June 16, 2011

Deadliest Catch: Man-Made Pollution

Cruising around the Scandinavian coastline in November might not sound like the most ideal place to conduct an environmental impact study, but for Norway’s Institute of Marine Research it was necessary in order to investigate the levels of anthropogenic particles in the Skagerrak strait. As you can imagine, this setting presented some unique challenges for the research team. In order to gather and analyze microscopic samples from this body of water, which is located between Norway, Denmark and Sweden, researchers had to come up with some new sampling methods and fashion their own equipment to solve problems that had plagued previous studies.

Norwegian Researchers Hard at Work^

One key obstacle that these scientists needed to overcome was how to distinguish between anthropogenic particles, which are man-made bits of matter that impact the environment (i.e. oil-spill droplets, asphalt, rubber tire wear, fly ash), from those particles with similar characteristics which appear naturally (volcanic ash, peat). To make this distinction, the samples were subjected to morphology analysis of their color and texture to first determine their origin before being counted.

The second major challenge was how to prevent contamination, which is easier said than done considering the harsh and unpredictable nature of the sea. One of the steps the researchers took to solve this was to develop control samples, free of any contaminants, which they could actually bring on board the ship with them. To further reduce the potential of contaminating samples, they also created new methodology and constructed their own customized sampling apparatus.

You can see a schematic of the sampling equipment the Institute researchers built in their published study. Their setup involved a submersible water pump that was positioned inside a waterproof case connected to the sampling filter (10 μm hydrophobic polycarbonate membrane filters, along with a 30 μm square mesh nylon filter as a support) which was placed directly in the sea. To protect the filter from wave turbulence they modified one of our filter holders (this one) with a new outlet fitting and a larger, semi-enclosed inlet with a smooth surface. The filters were also placed in protective holders before and after filtration for protection and to reduce the risk of contamination. As an added protective measure, the filter apparatus was ultrasonically cleaned prior to use. The entire sampling apparatus was held 2 meters outside the boat (to further prevent contamination) and the sampling depth was limited to between 0.1 and 1.5 meters to protect it from large waves.

While it will take many more studies before conclusions can be drawn about the state of this particular body of water, the scientists were encouraged by the results of the new methodology they created. They note in the conclusion how these improvements have standardized the sampling and reduced the risk of contamination. The scientists also suggest that this sampling equipment could be adapted for larger particles.

To read the full study, visit here.
^Image from Survey of microscopic anthropogenic particles in Skagerrak. Lysekil and Flødevigen 2010-11-20, Institute of Marine Research.

Monday, June 6, 2011

Quenching the Thirst for Potable Water Through Nanotechnology

After our last post discussing how experiments with carbon nanotubes (CNT’s) might greatly improve the effectiveness of reverse osmosis desalination now comes a new report from the Institute of Physics that shows researchers are getting closer to making this a reality. Already over a billion people do not have regular access to clean water and the problem will likely get worse as the demand for drinkable water is expected to grow dramatically in the near future. With natural sources increasingly scarce, this urgent need means there is an intense global interest in any potentially viable forms of water purification.

Right now the main issues preventing RO desalination on a large-scale basis are that the membranes used to perform seawater to freshwater separation do not remove salt ions with enough efficiency and they also require great amounts of energy (and therefore expense) in order to purify the water. Jason Reese, a Professor of Thermodynamics and Fluid Mechanics at the University of Strathclyde and also the author of this report, states, “The holy grail of reverse-osmosis desalination is combining high water-transport rates with efficient salt-ion rejection.” Incredibly, these little carbon nanotubes may be able to satisfy both of these requirements for widespread adoption.

Early tests and simulations have shown that CNT membranes could have water permeability that is 20 times greater than today’s materials. Additionally, carbon nanotubes can be chemically tailored to better reject salt ions, thus improving upon the desalination process in multiple key areas.

While it is still early, these features are promising enough that scientists such as Professor Reese feel it is a very real possibility that this application of nanotechnology could be used to curtail our growing water demand.

Read more about this report here.

Tuesday, May 24, 2011

Rising Salinity Cause for Concern at North Carolina Desalination Plant

An increase in salinity levels at the North Reverse Osmosis Water Plant in Kill Devil Hills (yes, that’s the town name) that had been creating stress for some local officials has been explained in a recent study. Researchers from nearby Duke University found that the rising salinity levels at this coastal aquifer are the result of fossil seawater and not seawater intrusion, as had been feared. Since the well’s installation in the late 1980’s salinity has more than doubled from about 1,000 mg/L to about 2,500 mg/L. There was much cause for relief however, when researchers were able to attribute the rise to fossilized seawater and not to seawater leaking in from the coast.

According to the director of the study, Duke Professor Avner Vengosh, knowing the source of the salinity increase is important because fossil seawater raises salinity, “At a relatively slow and steady rate that is more manageable and sustainable than the rapid increase we’d see if there was modern-day seawater intrusion.” As a result of this study the community will be able to rely on this aquifer for decades to come without having to resort to more expensive seawater desalination techniques which require more energy and advanced filtration methods.

Current treatment for groundwater desalination includes the use of reverse osmosis (RO) membranes to separate dissolved salts from potable water. Even with the rising salinity level these membranes remove around 96 to 99 percent of the dissolved salts. RO membranes also remove between 16 and 42 percent of the boron and 54 to 75 percent of the arsenic from the groundwater. Additional treatment following reverse osmosis desalination continues to remove arsenic until it is within safe drinking levels (10 parts per billion, according to the EPA).

Because seawater consistently has more salt than groundwater it requires more energy to treat, and therefore the cost is higher. Per this report on desalination from the Pacific Institute, “Energy is the single largest variable cost for a desalination plant, varying from one-third to more than one-half the cost of produced water.” The report also states, “At these percentages, a 25% increase in energy cost would increase the cost of produced water by 11% (for RO plants).” In looking at these percentages, it’s easy to see why the plant was concerned about seawater intrusion. Thanks to this research, the local citizens can drink easier knowing they have a supply of healthy, affordable water for a long time to come.

Click here to learn more about this case.

Thursday, March 17, 2011

How NOT to Handle Wastewater Discharge

Here’s further evidence that monitoring your company's waste output is something you should probably keep an eye on…

Yesterday the former environmental, health & safety manager for AMCAN Beverages, Inc. (A subsidiary of Coca-Cola) pled guilty to falsifying reports about their plant's wastewater discharge. He now faces up to 3 years in prison and/or upwards of $250,000 in fines for directing employees to dilute wastewater samples before they were sent for off-site testing and then reporting on the tampered results.  

The company was caught when the City of American Canyon’s own wastewater treatment plant staterd experiencing operational problems relating to Biological Oxygen Demand (BOD) and Total Suspended Solids (TSS) measurements and began a covert investigation into industrial discharges in the area, leading them to AMCAN.

If only Captain Planet was still around to call on, he'd take pollution down to zero...

Read more details on the case here.

And yes, we do offer plenty of different products for TSS measurements as well as bench scale systems for municipal/industrial waste and wastewater purification.  

Monday, March 7, 2011

EPA Creates 4 New Clean Air Research Centers

Today the Environmental Protection Agency awarded $32 million to 4 universities around the country to study the health impacts of air pollution. These centers will answering questions like, "does air pollution effect a child's learning ability?" "Are obese people more susceptible to health effects of air pollution?" "How does your commute effect your health?"

We work with a number of environmental labs to provide filtration materials, and one of the most common requests we get from them is for our 0.45 micron, 25mm silver membranes to comply with NIOSH methods for testing airborne contaminants such as silica and bromine. 

Here is a breakdown of what the four new centers are focusing on:
  • University of Washington - Effects of roadway pollution on on cardiovascular health.
  • Michigan State University - The relationships between obesity and air pollution.
  • Emory University / Georgia Institute of Technology - Characterize health risks of air pollution mixtures, research how social factors (living location, commute, etc.) impact health. 
  • Harvard University - Investigate health effects of short-term and long-term exposure to pollutants on specific health functions, including cognitive function, birth weight, and mortality. 
See also:
"EPA Awards $32 Million to Understand Health Impacts of Air Pollution"

EPA Clean Air Research Centers Home